BSA Stainles Steel Fork Seal Holders (2) - 29-5310 - M20 / A7 / A10 / A50 / A65

Fantastic “AAA”

The SS fork seal holders are every bit as nice as the original chrome ones. I was initially concerned they might look different but the finish is very good and can be easily rebuffed on a buffing wheel. I had a fitting issue that every purchaser should check before assembly. The flared end diameter is wider than my originals and the holders would not fit into the fork shrouds. I installed them on a 1956 BSA Golden Flash. To make them work I had to cut the flared end down on a lathe, which I have, so they would fit. If you don't own a lathe or have access to one you may have to have a machine shop perform the service. Before you buy measure your originals and compare to these replacements so you know what you are getting into.